A modular artist booth kit is a set of interlocking frosted panels and connectors that snap together by hand, with no tools, to build display walls, shelves, and cubes for artist alley tables, convention booths, and markets. You arrange the panels to suit your space, then take it apart and rebuild it differently at your next event. Our kits are designed around a standard 180 cm / 6 ft table and can expand to cover a corner or a full booth.

Wire grid cubes do the job, but your art ends up competing with the busy metal mesh and whatever clutter shows through behind it. Our frosted panels give you a clean, light-diffusing backdrop, so your prints and merch are what people notice in a crowded hall, not the background. They are far lighter than steel grids, pack completely flat for travel, and snap into different layouts in under 30 minutes with no tools, so one kit reshapes to fit any table, corner or booth. And when you want a self-serve pin or charm wall, our wire grid and hook add-ons clip straight in, so you still get that browse-it-yourself setup without the heavy, messy look.

We sell complete kits rather than individual parts, because each kit is designed to work as a whole. The panel and connector counts are matched, with a few spares included, so you can build a range of structures with confidence and keep going if a piece is ever lost or damaged. These kits are built to last for years, and if we ever change a colour you will still have plenty to keep building with.

The whole system is built around standard convention tables, and each kit is sized for a different footprint:

• Square Core Kit and Shapeshift Base Kit: half tables, counters and low stands (around 90 cm / 3 ft). Great when you want low walls and your tabletop kept visible.
• Shapeshift Kit: a full 180 cm / 6 ft table with tall framing. The best all-rounder for most artists.
• Shapeshift Max Kit: double and corner setups (360 cm / 12 ft), free-standing booths, and full convention exhibitor spaces.

Every panel and connector is cross-compatible, so you can start small and expand the same kit as your booth grows.

Each kit's colours are limited edition and exclusive to that kit, so the colours listed for a kit are the colours it comes in. If a colour shows as sold out, it is coming back, so it is worth checking again soon. But if a colour is not offered in a kit today, it will not be added to that kit later, so the palette you choose stays unique to your setup. We would rather keep each kit's colours special than keep adding more.

We offer four main panel shapes: Squares (35 x 35 cm / 13.78 x 13.78 in), Hinged Squares or Doors (35 x 35 cm / 13.78 x 13.78 in), Half Squares (35 x 17.5 cm / 13.78 x 6.89 in), and Triangles (35 x 35 cm / 13.78 x 13.78 in sides). The square panels are the standard building block, while the half, hinged, and triangle panels add creative versatility.

Our modular cube panels are made from high quality frosted polypropylene (PP) plastic. They are lightweight yet durable, translucent so they let light through, and available in 19 or more colours. The connectors are made from sturdy ABS plastic, and our foldable hooks are made from PLA filament.

They are entirely our own. We are the original creators of this system, and everything from our panel shapes to our exclusive colours is designed by us and sold only by us. We do not dropship and we do not resell generic factory stock, so when you buy a kit you are getting a display setup you cannot find anywhere else.

Each shelf panel holds up to 5 kg / 11 lb when built correctly, which covers prints, books, apparel, bags, figures and most 3D merch. For heavier ranges, the wider and stacked layouts add stability, and you can build sturdy shelf framing rather than relying on hanging alone. The connectors lock everything into a rigid structure.

Yes. Every panel and connector is cross compatible, so you can mix and match kits or combine two kits for a larger setup. The system is designed to grow with you, from half a table to a full or double table space, all with one kit.

Each kit includes frosted panels, connectors, and a setup guide. Larger kits add bonus accessories such as foldable clip hooks and special connectors.

Most artists have their kit fully set up in under 30 minutes, with no tools and no zip ties. You simply snap the connectors into the panels and stack. The more you do it, the faster it gets. There is also an optional mallet if you want to lock pieces firmly in place while keeping it easy on your hands.

The panels are built for display. Our foldable clip hooks snap onto the panels wherever you need them, so you can hang prints, posters, banners, and bags, and rearrange them as your layout changes. Because the panels also stack into cubes, you can create raised shelves for books, merchandise, and other items.

Yes. When built correctly, each shelf panel holds up to 5 kg / 11 lb, which is plenty for prints, books and merch. The connectors lock the panels into a rigid structure, and you can use the optional mallet to seat each joint firmly. For breezier outdoor markets, a slightly wider or stacked footprint adds stability, so keep taller walls anchored against your table and lower the height in strong wind. For most indoor halls it is rock solid.

Yes. The panels stack completely flat, and larger kits fit in checked luggage. If you need to, you can even take part of your panels as carry on, since the 35 x 35 cm panels and accessories fit within the usual 56 x 36 x 23 cm carry on allowance.

That is the whole idea. One kit reconfigures into different layouts for different events, sets up in minutes, and is built to last for years, so the cost is spread across many conventions rather than a single weekend. You can also expand the same kit over time instead of buying a new display.

Yes. We ship our modular booth kits worldwide using a range of shipping carriers.

Yes. The majority of our kits includes free Global Express shipping right to your door!

We partner with reliable carriers so your order arrives safely. Within Australia we use Australia Post and FedEx. For international orders we use FedEx Express.

All orders ship from Sydney, Australia, and are usually processed within 1 to 3 business days. During peak periods such as convention season, or for larger or more complex kits, processing can take longer. Processing times are estimates only, and delays can occur due to order volume, production schedules, or circumstances outside our control. Orders are not processed or dispatched on weekends or Australian public holidays.

If you have an urgent convention, market, or artist alley event coming up, please contact us before ordering so we can advise whether delivery is likely in time.

We know convention deadlines are tight. Typical shipping times are: Australia metro 2 to 5 business days, Australia regional 5 to 10 business days, Australia rural 7 to 12 business days, United States 3 to 5 business days, and the rest of the world 7 to 21 business days.

Shipping timeframes are estimates only. We use reliable carriers, but delays outside our control can happen. You can find more details in our Shipping Policy.

We are a business based in Sydney, Australia, and operate under Australian tax law.

For Australian customers, no duties or extra taxes apply, and all prices include GST. For United States customers, we ship via FedEx with duties prepaid, so the product price and duties you pay at checkout are final, with no surprise bills on delivery. For all other international customers, your order may be subject to local VAT, GST, or import duties set by your country's customs office, and these fees are the responsibility of the recipient.

Most of our products include free Global Express Shipping with FedEx or additional available carriers in your local region.

We also choose well insured, reliable carriers on purpose. Your event dates matter, so we use channels that reduce the risk of delays, loss, or panels being warped or damaged by budget couriers, giving your order the best chance of arriving in good condition and on time.

For more details on our free shipping offers, please check the relevant product pages or reach out to use if you have any more questions!

Yes. All orders are sent with track and trace services, and you will receive a tracking link by email as soon as your order is on its way.

If your kit arrives damaged or you are not happy, reach out to our team and we will sort it out, because we stand behind every product we make.

We do not accept returns for change of mind, but faulty or damaged items are covered. Please report any transit damage or fault within 7 days of delivery and include photos of the packaging and items. You can find the full details in our Return and Refund Policy.